
Inland Valley Heating & Air Conditioning
Guides, Tips & FAQ's
We are here to HELP!
If you need HVAC Professional, Give Us a Call Today!
(909) 653-6674
May 2016
Things a New Homeowner Should Do Immediately to Save Money
Protect yourself, your home, and your wallet
So you’ve just moved into your nice new home. You’ve unloaded the boxes and started to unpack your life.
Right now is the perfect time to walk through a checklist of ways to save money on your home for years to come.
Starting on these things as early as possible will allow you to start saving money sooner rather than later. Plus, some of them will be easier to accomplish before you hang pictures or get too settled in — and lose your move-in momentum.
There are a total of 19 things to help you check your home and do immediately, however we don't want to scare you away. For now, we'll release 1-3 Tips per a month to make this more manageable. The tips will help you reduce the energy and maintenance costs of your home over the long haul.
The pros at Inland Valley Heating & Air Conditioning can help you make the right choice when it comes to your HVAC system repair or replacement decision. We provide quality HVAC services for homeowners in Inland Empire and the surrounding areas. Never hesitate to call. Our happy client's speak highly and we look forward to working with you! Click Here to review our Testimonials page and you can even find us on Facebook & Google. We look forward to hearing from you soon.
February 2016
Energy Saving Tips
Protect yourself, your home, and your wallet
Replace that old furnace and save:
Is your furnace more than 15 years old? Have it replaced with one of the new ENERGY STAR rated models. They're about 15% more efficient than standard models.
Every degree makes a difference:
Save money by lowering your thermostat to 68° in the winter. For every degree you lower your heat in the 60° to 70° range, you'll save up to 5% on heating costs.
Don't get burned by water heating costs:
Your water heater can account for 14% to 25% of the energy consumed in your home. Make sure you have an energy-efficient model and turn it down to 120°F to save.
Use your dishwasher to save time and energy:
Did you know that your dishwasher uses less hot water than washing dishes by hand? You'll also conserve more energy if the dishwasher is fully loaded.
The pros at Inland Valley Heating & Air Conditioning can help you make an HVAC system repair or replacement decision. We provide quality HVAC services for homeowners in Inland Empire and the surrounding areas.
January 2016
Take Precautions with Your Pets During the Winter Months!
-
Does Your Pet Spend Most of Their Time Outside?
A dog or cat is happiest and healthiest when kept indoors. If for some reason your dog is outdoors much of the day, he or she must be protected by a dry, draft-free shelter that is large enough to allow the dog to sit and lie down comfortably but small enough to hold in his/her body heat. The floor should be raised a few inches off the ground and covered with cedar shavings or straw. The doorway should be covered with waterproof burlap or heavy plastic.
-
Help neighborhood outdoor cats
If there are outdoor cats, either owned pets or community cats (ferals, who are scared of people, and strays, who are lost or abandoned pets) in your area, remember that they need protection from the elements as well as food and water. It's easy to give them a hand.
-
Give your pets plenty of food and water
Pets who spend a lot of time outdoors need more food in the winter because keeping warm depletes energy. Routinely check your pet's water dish to make certain the water is fresh and unfrozen. Use plastic food and water bowls; when the temperature is low, your pet's tongue can stick and freeze to metal.
-
Be careful with cats, wildlife and cars
Warm engines in parked cars attract cats and small wildlife, who may crawl up under the hood. To avoid injuring any hidden animals, bang on your car's hood to scare them away before starting your engine.
-
Protect paws from salt
The salt and other chemicals used to melt snow and ice can irritate the pads of your pet's feet. Wipe all paws with a damp towel before your pet licks them and irritates his/her mouth.
-
Avoid antifreeze poisoning
Antifreeze is a deadly poison, but it has a sweet taste that may attract animals and children. Wipe up spills and keep antifreeze (and all household chemicals) out of reach. Coolants and antifreeze made with propylene glycol are less toxic to pets, wildlife and family. Read more about pets and antifreeze »
-
Speak out if you see a pet left in the cold
If you encounter a pet left in the cold, politely let the owner know you're concerned. If they don't respond well, document what you see: the date, time, exact location and type of animal, plus as many details as possible. Video and photographic documentation (even a cell phone photo) will help bolster your case. Then contact your local animal control agency or county sheriff's office and present your evidence. Take detailed notes regarding whom you speak with and when. Respectfully follow up in a few days if the situation has not been remedied.Learn more »
-
Horse owners: provide special care to your outdoor pets
Give your horses shelter and dry warmth
Be sure your horses have access to a barn or a three-sided run-in so they can escape the wind and cold.
While not all horses will need to be blanketed, blankets will help horses keep warm and dry, especially if there is any rain or snow. If you’ve body-clipped your horses, keep them blanketed throughout the winter.
-
Supply food and water to your horses around the clock
Give your horses access to unfrozen water at all times. You can use heated buckets or water heaters/deicers to make sure the water doesn’t freeze. Feed your horses more forage—unlimited amounts, if possible—during extreme cold. This will help your horses create heat and regulate their body temperatures.
December 2015
HVAC System Repair or Replacement?
Deciding between an HVAC system repair or replacement can be a difficult decision since both require an investment. Sometimes it makes sense to simply repair a system, but over the long term, it may be a better use of your money to replace the system altogether. New systems carry warranties and offer better energy efficiency that offset their initial and long-term cost. Conversely, repairing an existing one may be an affordable option for a few more years of service. Your Honest HVAC technician at Inland Valley Heating & Air Conditioning can give you a thorough assessment of the condition of your system and the extent of the repair. By following through with the repair and reducing the cooling load indoors, you may be able continue to use your system dependably.
Other Factors That Determine Whether HVAC System Repair or Replacement makes Sense Include:
-
It’s over 10 years old. Although age isn’t the sole determinant for an HVAC system replacement, in our climate, it can weigh more heavily. Since cooling systems work long and hard for months on end, they experience substantial wear and tear. If you or a previous homeowner hasn’t stayed up to date on maintenance, including air filter changes, age will be a more relevant factor.
-
It uses R-22 refrigerant. R-22 is being phased out by the U.S. Environmental Protection Agency, and its price has risen in response to shrinking supplies. If your system is more than 10 years old and uses R-22, it’s probably better to replace your system than repair it. The price of R-22 will only continue to escalate. Its replacement — R410-A — is more efficient, costs less and has few, if any, harmful side effects.
-
It needs frequent or an expensive repair. Frequent repairs are not only costly, but they also keep your system offline until they’re fixed. Replacing the compressor for a system that uses R-22 wouldn’t be a good investment, nor for a system that’s over 10 to 15 years old.
The pros at Inland Valley Heating & Air Conditioning can help you make an HVAC system repair or replacement decision. We provide quality HVAC services for homeowners in Inland Empire and the surrounding areas.
November 2015
Are You Hearing Noises in Your DUCTS?
Duct and furnace noise can be alarming to homeowners. However, all duct and furnace sounds aren’t indicative of a problem with the HVAC system. Often, homeowners can identify the root cause of ductwork and furnace noise by simply listening to the sounds the HVAC system makes.
Ductwork Construction
A home’s ductwork is responsible for delivering conditioned air throughout the home. Ductwork is typically made of sheet metal and can be found in three shapes: circular, square and rectangular. The shape of the ductwork has a direct effect on the amount of pressure ducts can handle. Circular ducts can handle the most pressure, while rectangular ductwork can handle the least. Because it’s made of metal, ductwork is likely to make noise.
Popping Noises
Many homeowners report hearing a popping noise while the HVAC system is running. Ductwork is only able to handle a certain amount of pressure without expanding. Once the air pressure in the ducts reaches this level, the sheet metal is forced to expand. Although the popping sound may be startling or bothersome, it’s not a symptom of a larger issue with the HVAC system.
Other popping noises in the ductwork may occur due to extreme temperature differences. Ducts in a cold home may pop when the heat is activated due to the change in temperature.
Duct and Furnace Noise After Cleaning
Some homeowners experience new noises in the ductwork and furnace after having the HVAC system cleaned. During normal use, dust, debris and pollutants can accumulate in the furnace and duct system. These particles can restrict airflow, resulting in a HVAC system that’s unable to run efficiently.
Once the HVAC components are cleaned, the system is again able to achieve peak performance while using less energy. Because of this, the system is able to put additional pressure on the ductwork. The noises made by the system after a cleaning are the normal popping noises associated with the expansion of ducts.
Booms
Gas-burning furnaces use a series of burners to heat air. When the heat is turned on, each one of the burners ignites. When a furnace becomes clogged, the ignition of one or more of the burners can be delayed from a couple seconds to a few minutes. During the delay, natural gas continues to accumulate around the burner.
Once the burner does ignite, the excess natural gas ignites as well. This can result in a small explosion which produces the “boom” sound.
Do you suspect clogged burners? Contact Inland Valley Heating & Air Conditioning, your HVAC professional immediately. Clogged burners have the potential to crack the furnace’s heat exchanger, which can result in costly repairs. Additionally, clogged burners pose a fire hazard. A qualified HVAC technician can clean the furnace and perform a maintenance check to ensure all HVAC components are working as expected.
Whistling Noises
Whistling noises are indicative of an air leak in the home. To diagnose this, homeowners should visually inspect exposed ductwork. Damaged air ducts should be replaced and cracks should be sealed to eliminate air leaks and to increase the home’s efficiency.
If the registers and vents inside the home aren’t properly sized, air leaks can occur around the vents as well. Replacing vent covers with better-fitting options will reduce the whistling sound and increase the HVAC system’s efficiency.
Another method to reduce whistling noises is to slow down the furnace’s fan speed. This option is only available when the heat is on during cooler weather. Decreased fan speed in summer months can result in the air conditioning unit freezing.
For professional assistance diagnosing the cause of ductwork and furnace noise in your Inland Empire home, contact Inland Valley Heating & Air Conditioning today. Our Nate Certified HVAC technicians provide quality Installation, Service & Repair. We'd be happy to help!
October 2015 Tip!
Watch Out the El Nino Weather Coming this Winter!
Living in sunny California has it's perks, right? However, based on local weather reports we are in for a major rain fall this winter. Get winter ready and call Inland Valley Heating & Air Conditioning to ensure your homes heating source is running correctly and efficently. Ensuring things are running right now, will help you save later....
Addtional Information: Residents of the western states may remember the flooding that struck California during the strong 1997-98 El Nino. In February 1998, a series of storms caused an estimated $550 million in damage and killed 17 people in California. A total of 35 counties were declared federal disaster areas. This fits into the bucket of the wetter-than-average winter you would typically expect in a moderate or strong El Niño.
Interestingly, during the previous winter there was also major flooding in California and it was even more costly with a total price tag of $1.8 billion, according to Jan Null, a consulting meteorologist in California. However, El Niño was not present that winter and rainfall for the season was near average. The flooding was the result of excessive rainfall that fell in a short time period combined with snowmelt from late December to early January.
The weak El Niño in the winter of 2006-07 provided a totally different story than what we saw in the very strong 1997-98 El Niño winter.
California had its 23rd driest winter season on record when looking at the three-month period from December 2006 to February 2007. In Los Angeles, the entire water year from July 2006 to June 2007 was the driest on record with just 3.21 inches of rainfall.
So, those hoping for drought relief next winter in the Golden State shouldn't immediately draw a conclusion that significant rains are ahead in any El Niño year. The strength of the El Niño can play a role in the outcome. In addition, heavy rainfall can occur with or without El Niño present and that was the case in the winter preceding the strong 1997-1998 El Niño.
September 2015 Tip!
The Kids Are Back in School, So It’s Primetime to Recoup Summertime Energy Expenses
From video games and television to air conditioning and pool filtering, having the kids home during the summer is a big energy expense. If the high energy bills during these months has you concerned, you’ll be glad to know that fall is a great time to recoup summertime energy expenses. With the kids away at school, sports or other activities throughout most of the day, you’ll have the chance to cut back at home.
To help you maximize your energy savings, we’ve come up with a few tips that are easy to understand and follow.
You can:
-
Adjust your thermostat – You want your kids to be cool and comfortable while at home, but when they’re away there’s little reason to keep your programmable thermostat at the perfect temperature for comfort. By raising the temperature a few degrees, your air conditioner won’t need to work has hard or use as much energy.
-
Unplug those electronics – Even when a device is off, it draws power from the grid when plugged into a socket. Idle, plugged-in devices can account for as much as 10 percent of energy usage in the average home.
-
Darken your rooms – Sunlight entering through your home’s windows can create a greenhouse effect. You can reduce your need for air conditioning by simply closing blinds, shades and drapes when you don’t need a room to be lit.
-
Schedule your maintenance – The kids going back to school is a great time to schedule your annual HVAC maintenance. With no one around using the air conditioning or heat, your HVAC System can be tested and serviced by our great technition at Inland Valley Heating & Air Conditioning. We will ensure everything is working properly.
If you’re looking for more information on how to recoup summertime energy expenses or other issues related to home comfort, contact us at Inland Valley Heating & Air Conditioning. We’ve provided excellent service to the Inland Empire and the surrounding areas. Our goal is to help educate our customers in the Inland Empire area about energy and home comfort issues (specific to HVAC systems).
August 2015 Tip!
The dog days of summer are here so here's a big reminder: If you plan to take your pet out with you, it's important to remember how dangerous the inside of a parked car can be
- Never leave your pet in a car when you travel or do errands.
- On very hot days, limit exercising your pet to early morning or evening hours.
- Asphalt always gets very hot and can burn your pet's paws.
- Pets with light-colored fur on their ears are particularly vulnerable to sunburn and skin cancer. Use sunscreen on their noses and ear tips
Signs of heat stroke in animals include:
- Body temperature of 104F to 110F degrees
- Excessive panting
- Dark or bright red tongue and gums
- Sticky or dry tongue and gums
- Staggering
- Stupor
- Seizures
- Bloody diarrhea or vomiting
- Rapid heartbeat
Please don't leave your Dog or any other animal in your car. It's very dangerous! Imagine yourself being locked in a car, not good. Research shows that even at 80 degrees outside, your vehicle will increase temperatures over 100 degrees. As humans we have the ability to sweat when over heated, Dogs to now. Think twice before taking your dog out with you!
July 2015 Tip!
The Solar Advantage
Solar energy offers numerous benefits for Residential Home Owners, Commerical Building Owners, as well as to the environment. Among the many reasons solar energy is a bright idea:
It’s clean and green
-
Solar energy systems allow you to capture free sunlight and convert it into usable power for your building.
-
Solar energy can be used to heat and cool your home and building, but has almost no impact on the global climate.
-
While nonrenewable energy sources like oil, gas and coal are becoming increasingly scarce, the sun’s energy is limitless.
-
Each Solar Energy System reduces a building’s carbon footprint and CO2 emissions by using the clean, renewable energy of the sun.
Solar energy helps meet green building standards
-
ASHRAE Green Standard 189.1 requirements to be solar-ready
-
LEED® EAC2 On-Site Renewable Energy Credit
-
California’s 2010 Green Building Standards Code (CALGreen)
June 2015 Tip!
Water Conservation in the Yard & Garden Tip!
In 1990, 30 states in the US reported 'water-stress' conditions. In 2000, the number of states reporting water-stress rose to 40. In 2009, the number rose to 45 & Now there is a worsening trend in water supply nationwide. Taking measures at home to conserve water not only saves you money, it also is of benefit to the greater community. It should be noted that installing low-flow aerators, showerheads, tank banks and other water-saving devices usually is a very simple operation which can be done by the homeowner and does not even require the use of tools. Water conservation at home is one of the easiest measures to put in place, and saving water should become part of everday family practice.
1. Plant drought-resistant lawns, shrubs and plants
If you are planting a new lawn, or overseeding an existing lawn, use drought-resistant grasses such as the new"Eco-Lawn".
Many beautiful shrubs and plants thrive with far less watering than other species. Replace herbaceous perennial borders with native plants. Native plants will use less water and be more resistant to local plant diseases. Consider applying the principles of xeriscape for a low-maintenance, drought resistant yard.
Plant slopes with plants that will retain water and help reduce runoff.
Group plants according to their watering needs.
2. Put a layer of mulch around trees and plants
Mulch will slow evaporation of moisture while discouraging weed growth. Adding 2 - 4 inches of organic material such as compost or bark mulch will increase the ability of the soil to retain moisture. Press the mulch down around the dripline of each plant to form a slight depression which will prevent or minimize water runoff.
For information about different mulch materials and their best use, click here.
3. Don't water the gutter
Position your sprinklers so water lands on the lawn or garden, not on paved areas. Also, avoid watering on windy days.
4. Water your lawn only when it needs it
A good way to see if your lawn needs watering is to step on the grass. If it springs back up when you move, it doesn't need water. If it stays flat, the lawn is ready for watering. Letting the grass grow taller (to 3") will also promote water retention in the soil.
Most lawns only need about 1" of water each week. During dry spells, you can stop watering altogether and the lawn will go brown and dormant. Once cooler weather arrives, the morning dew and rainfall will bring the lawn back to its usual vigor. This may result in a brown summer lawn, but it saves a lot of water.
5. Deep-soak your lawn
When watering the lawn, do it long enough for the moisture to soak down to the roots where it will do the most good. A light sprinkling can evaporate quickly and tends to encourage shallow root systems. Put an empty tuna can on your lawn - when it's full, you've watered about the right amount. Visit our natural lawn care page for more information.
6. Water during the early parts of the day; avoid watering when it's windy
Early morning is generally better than dusk since it helps prevent the growth of fungus. Early watering, and late watering, also reduce water loss to evaporation. Watering early in the day is also the best defence against slugs and other garden pests. Try not to water when it's windy - wind can blow sprinklers off target and speed evaporation.
7. Add organic matter and use efficient watering systems for shrubs, flower beds and lawns
Adding organic material to your soil will help increase its absorption and water retention. Areas which are already planted can be 'top dressed' with compost or organic matter.
You can greatly reduce the amount of water used for shrubs, beds and lawns by:
- the strategic placement of soaker hoses
- installing a rain barrel water catchment system
- installing a simple drip-irrigation system
Avoid over-watering plants and shrubs, as this can actually diminish plant health and cause yellowing of the leaves.
When hand watering, use a variable spray nozzle for targeted watering.
8. Don't run the hose while washing your car
Clean the car using a pail of soapy water. Use the hose only for rinsing - this simple practice can save as much as 150 gallons when washing a car. Use a spray nozzle when rinsing for more efficient use of water. Better yet, use awaterless car washing system; there are several brands, such as EcoTouch, which are now on the market.
9. Use a broom, not a hose, to clean driveways and sidewalks
10. Check for leaks in pipes, hoses, faucets and couplings
Leaks outside the house may not seem as bad since they're not as visible. But they can be just as wasteful as leaks indoors. Check frequently to keep them drip-free. Use hose washers at spigots and hose connections to eliminate leaks.
Water conservation comes naturally when everyone in the family is aware of its importance, and parents take the time to teach children some of the simple water-saving methods around the home which can make a big difference.
May 2015 Tip!
Spring cleaning has been a seasonal ritual for generations that is spurred on by an innate urge to ready the home for warm-weather fun and engagements. In today’s modern world, many homeowners in the Inland Empire are taking the time to get their HVAC systems ready for spring and summer as well. The following five products, services and strategies can help ensure that your home stays cool and comfortable when outdoor temperatures soar. A few preparatory steps can help your energy costs remain manageable as well.
1. HVAC Preventative Maintenance
Air conditioners are complex pieces of machinery designed to keep your home at an ideal temperature. Cooling systems are subject to frequent stops and starts and long periods of continual use. Just as your car needs regular tune ups to keep it running efficiently, seasonal inspections for your air conditioning system are necessary to prevent damage from wear and tear as well. Preventative maintenance extends the service life of your cooling system. Because a well-maintained air conditioner operates at up to 25% better efficiency than a neglected system, you’ll enjoy lower operating costs too.
2. Programmable Thermostats
Setting your thermostat to keep your home cool 24 hours a day can send your energy bills skyrocketing. A programmable thermostat allows you to enjoy the same level of comfort and save money too. Scheduling the device to raise the temperature setting while you’re asleep or away from home can cut your energy bills by 10% or more. For added convenience, choose a Wi-Fi enabled model that lets your program the thermostat from your computer or mobile devices.
3. Green Home Improvements
A few affordable home improvements can make it easier for your air conditioner to keep your home cool, saving you money without compromising comfort. A ceiling fan, for example, can make a room feel five degrees cooler and costs just pennies an hour to operate. Around 20% of heat that enters your home comes from direct sunlight. A few strategically planted deciduous trees can shade your home during the winter yet allow sunlight to filter through in the winter.
4. Duct Sealing and Insulation
Leaky ductwork can reduce the energy efficiency of your cooling system by as much as 25 percent, according to the Environmental Protection Agency (EPA). A pressure test conducted by the experts at Inland Valley Heating & Air Conditioning can determine if your AC system’s ductwork is wasting energy and money. We can also seal and insulate your ducts to eliminate leaks and enhance your cooling system’s efficiency and performance.
5. Certified HVAC Technicians
At Inland Valley Heating & Air Conditioning, our technicians are experts at identifying energy-wasting areas in your home. Whether you need a whole-home energy assessment, preventative maintenance or a brand new installation, you can depend on Inland Valley Heating & Air Conditioning to help you and your family stay comfortable in every season.
April 2015 Tip!
10 Tips on Saving Water at Home
1. Turn off the tap when you brush your teeth – this can save 6 litres of water per minute.
2. Place a cistern displacement device in your toilet cistern to reduce the volume of water used in each flush. You can get one of these from your water provider.
3. Take a shorter shower. Shower can use anything between 6 and 45 litres per minute.
4. Always use full loads in your washing machine and dishwasher – this cuts out unnecessary washes in between.
5. Fix a dripping tap. A dripping tap can waste 15 litres of water a day, or 5,500 litres of water a year.
6. Install a water butt to your drainpipe and use the water collected to water your plants, clean your car and wash your windows.
7. Water your garden with a watering can rather than a hosepipe. A hosepipe uses 1,000 litres of water an hour. Mulching your plants (with bark chippings, heavy compost or straw) and watering in the early morning and late afternoon will reduce evaporation and also save water.
8. Fill a jug with tap water and place this in your fridge. This will mean you do not have to leave the cold tap running for the water to run cold before you fill your glass.
9. Install a water meter. When you're paying your utility provider for exactly how much water you use, laid out in an itemised bill, there's an incentive to waste less of the stuff.
10. Invest in water-efficient goods when you need to replace household products. You can now buy water-efficient showerheads, taps, toilets, washing machines, dishwashers and many other water-saving products. For more information visit the Waterwise website.
March 2015 Tip!
Spring cleaning is a tradition, but there are some other chores that should be part of your springtime routine, too. Most of them take only a few minutes, so get started!
1. Check your air-conditioning and heating equipment before the beginning of a new season. Don't know what to look for? Give Inland Valley Heating & Air a Call! We would love to come out and make sure your system is going to run like it should, Rain or Shine.
2. Clean your bathroom fans once a year. Take the cover off, wash it in soapy water and clean dirt off the fan blades with a toothbrush. Be sure the power is off when you do this!
February 2015 Tip!
How do you know when a furnace replacement is in order?
Since your furnace was probably in place when you moved into your home, the first thing to do is find out the age of your unit. This may be as simple as looking at the original owners manual or calling the manufacturer with the unit's model number, but with individual cases some additional sleuthing may be required. Today's models operate reliably for 20 to 30 years. If your unit is more than 15 years old, its not a bad idea to begin considering furnace replacement options. According to the U.S. Energy Star program a new Energy Star Qualified gas furnace is typically 15% more efficient than a conventional gas furnace and an Energy Star Certified oil furnace is up to 4% more efficient than a baseline model. According to the Environmental Protection Agency, a new Energy Star gas furnace will save you an average of $94 in energy cost per year, while a new Energy Star oil furnace saves an average of $66 per year.
Telltale Signs
Ase aside, there are some obvious (and some more subtle) indications that it may be time for furnace replacement:
- If your furnace needs frequent repairs
- If your energy bills are going up despite usage staying the same.
- If the rooms in your home are heating unevenly, with some rooms hotter or colder than others.
- If your furnace is cycling on and off more frequently than in the past.
- If your home is starting to have humidity problems.
- If your furnace becomes excessively noisy or develops rattles, buzzes or hums.
- If your furnace starts putting out excessive dust, soot, dirt or rust particles.
- If you see visible signs of rust in and around your furnace, or if any of the components show cracks or corrosion
If your furnace is exhibiting any of these "warning signs" or you just feel it's not acting right, give the HVAC professionals at Inland Valley Heating & Air Conditioning a call (909) 643-6674. A simple repair may solve the problem; in other cases changing the filter or adding a new thermostat will do the trick.
January 2015 Tip!
Does your furnace go BOOM?
Delayed ignition is usually accompanied by a loud banging or booming sound that resembles a small explosion in your gas appliance. In your Inland Empires home’s furnace, this can be terrifying and should never be ignored.
What Causes Delayed Ignition
Delayed ignition usually happens when you first turn on your furnace, often after a long delay between use, so usually early in the fall or late in the spring when you don’t necessarily have it on every day of the week.
What happens is moisture builds up over the course of a period of inactivity and begins to corrode the firebox in your furnace. That corrosion builds up to the point that it starts to block the ports that feed gas into the burners. When these ports get blocked, the burners down the line cannot light and when you flip the switch, they won’t light immediately. Of course, while rust and corrosion are a risk, lint and dust can be equally problematic (and are more common if you don’t have your furnace cleaned properly each fall). Sulfur build up is also a possibility, as it is left behind by burning natural gas. It will appear as a layer of white on the surface of the burners or the pilot light. When all of this happens and the ports are not cleaned properly, gas will build up in the chamber after it is turned on and, when it finally ignites, create the small boom sound. It doesn’t just sound like an explosion – it is one – and if ignored, it can become incredibly dangerous.
Solving the Problem
Delayed furnace ignition is an easy problem to avoid. All you need to do is have your furnace cleaned properly before turning it on each fall. A Inland Valley Heating and Air technician will clean the burners and ports and remove any dust, lint, rust or sulfur buildup that might block ignition and cause a delay.
When replacing your furnace, look for a device with corrosion resistant materials. You can learn more about these when it comes time to replace your furnace from a technician. Most importantly, be careful. It may be a small problem now, but if left to build up over time, that small boom can become a much larger on
December 2014 Tip!
HVAC Filter Changes, Air Duct Maintenance
Have Your HVAC's Back And Change Those Filters!
The filters in your HVAC system are the first and most effective measure in protecting your heating and cooling system. Any HVAC specialist or home improvement guru will tell you, change your filters often. Keeping your system in fresh filters will greatly extend its life expectancy and this small bit of preventative maintenance can save you money on repairs down the road, not to mention help keep up the air quality in your home.
Although some products claim to be effective for ninety days or even longer, most industry experts recommend changing your filters every thirty days. In any case, you should inspect your filters regularly, as often as once a week, as the age of your HVAC system and the level of usage will determine how much wear and tear a filter suffers.
You know it is time to change your filters when it is coated in thick dust, usually gray or black. When a filter is clogged up like that, not only is it no longer doing its job, it is decreasing the efficiency of your heating system as the trapped dust absorbs heat. Plus, it also creates a serious fire hazard.
What filter is best for your? That depends mostly on your budget and the level of effort you want to put into maintaining your air conditioning system.
November 2014 Tip!
Is your furnace giving you trouble?
Gas Furnace Produces No Heat
Possible Causes
- Thermostat set too low and not calling for heat,
- Thermostat not working,
- Circuit breaker or fuse controlling the furnace is tripped or blown.
- Natural gas or propane control valve is closed,
- Pilot light is out (non-electronic ignition),
- Hot Surface Ignition electronic ignition problem
- Intermittent Pilot electronic ignition problem.
Here's some Possible Repairs
- Check that thermostat is in heat mode and has appropriate temperature setting
- Try moving dial setting up or down a few degrees
- Clean contacts in thermostat if it is a non-digital type
- Reset tripped circuit breaker
- Replace blown fuse
- Relight standing pilot light
- Troubleshoot hot surface ignition ignition
- Troubleshoot intermittent pilot ignition system.
Don't See What You're Looking For?